NetApp Daily Health-Check Commands

As a system admin its necessary to check your storage devices manually even though it is integrated with monitoring system because you will get some detailed information about the current environment status. 

Commands:

 filer> rdfile /etc/messages    

Note: If you want to see old syslog messages, use following commands /etc/messages.0; /etc/messages.1 etc.,

  filer> snapmirror status
  filer> snapvault status
  filer> vol status -f (or) aggr status -f
  filer> environment chassis list-sensors
  filer> vol status
  filer> aggr status  
  filer> df -Ah
  filer> df -h
  filer> lun show offline
 filer> sysconfig -a